MagicPRISM Inline

Based on Ring-Cavity optical parametric oscillator (OPO) technology, the MagicPRISM Inline is a cost effective laser source that generates wavelengths over a broad range in the VIS and IR. All components are hermetically sealed to protect optical components from the environment. Requiring no installation, the system includes verification hardware to check alignment after shipping or relocation. The modular design allows fast turnaround for service/upgrades and the OPO can be removed for access to harmonic and pump laser beams. Motorized tuning and harmonics auto-optimization provide a completely, hands-free tunable laser system.

Click Here to Download More Info

Wavelength Range [nm]:

Choose in Build Your Product

Peak OPO Energy [mJ]:

See Tuning Curves

Spectral Linewidth [cm-1]:

VIS/VIR: 5 – 80 ; NIR/NIRD: 30 – 80

Beam Divergence [mrad]:

< 10 (Signal, FWHM)

Linear Polarization:


UV Tuning [nm]:


Residual Pump Energy [mJ]:


Dimensions [in (mm)]:

See Dimensions Schematic

Pump Wavelength [nm]:

VIS/VIR: 355 ; NIR/NIRD: 532

Repetition Rate [Hz]:

10 or 20

Pulse Length [ns]:


Beam Diameter [mm]:


Trigger Connections:


PSU Dimensions [in(mm)]:

20.0 (508) x 11.1 (282) x 20.0 (508)

PSU Cooling:

Closed-cycle water cooled

Build Your Product
Option 1 Group

Wavelength Range

Choose between four wavelength ranges based on pump laser wavelength. Modules pumped with 355 nm offers peak OPO energy in the visible. Modules pumped with 532 nm offers peak OPO energy in the near-infrared.

Option 3 Group

Fast Tuning

Only available for NIR and NIRD. This option enables fast switching of the output wavelength such that each consecutive pulse can be set to any wavelength within the wavelength range of the system. The user can enter a sequence of wavelengths into the control software, with any step size (zero to full range) in any order, and the system will generate these wavelengths pulse after pulse. It can be set to stop after a single sequence or to repeat the sequence as defined by the end-user.

Option 4 Group

Wavemeter for realtime wavelength monitoring

The Wavemeter provides real time measurement of the OPO wavelength, which is displayed in the control software screen. The option allows closed-loop tuning of the OPO , which provides better than 1 nm accuracy of the Signal wavelength.

glqxz9283 sfy39587stf02 mnesdcuix8